Did you hear our radio ad? Click here to find out if you're eligible to save up to 96% on home insulation 

Is your home properly insulated? 9 top tips to stay warm this winter

June 20, 2018

Is your home properly insulated? 9 top tips to stay warm this winter

Whether you’re a tenant or a homeowner, it’s not always easy to tell why your home is cold, and what you can do about it. All you know is that it’s winter again, you’ve got three jumpers on and you’re dreading the next electricity bill...

Often the first place to start is insulation. Homes with no (or poorly fitted) insulation can lose up to 35% of heat and energy through the ceiling. That means the warmth from your heating is being wasted – and the money you spent to heat it too.

For 15 years we have provided advice and solutions to create warm, dry and energy efficient homes in our community. The two questions we hear the most are:

  1. My house isn’t insulated - what are my options?
  2. My house has some insulation but it’s still cold - what should I do?

Sound familiar? Here are our top tips when considering installing or upgrading insulation to make your home warmer and more energy efficient.

  1. Fit – insulation needs to be installed in all accessible areas, free from any gaps, rips or damage, and not touching the building paper. Heat and energy will escape out of any uninsulated space, so a comprehensive fit is key.

    (See the NZS4246:2016 for best practise and our install standards.)

  2. Old or poor quality insulation settles, thinning like an old blanket. If the insulation in your ceiling is less than 200mm thick (or more than 10 years old) it probably needs a top-up.

  3. Foil underfloor insulation - should be replaced with bulk insulation because it loses its reflective properties and thermal value over time.

  4. Light fittings – traditional downlights get so hot they are unsafe to insulate over. This means there are either large gaps in insulation (that heat and energy escape out of) or that existing insulation gets heat damage, and cannot perform properly. Where possible people should opt for insulation-coverable light fittings such as LED downlights, so that a consistent thermal envelope can be achieved.

  5. Using the attic space – when insulation gets damaged or compressed it cannot perform properly. If the attic needs to be used for storage or accessed, a flooring and storage system like Attic Islands protect insulation against compression and provides a solid platform to walk and store on.

  6. Water damage – when insulation gets wet it cannot perform properly. Fibreglass insulation is especially vulnerable to water damage and difficult to remove once it’s wet. Check and watch out for roof leaks, making sure to fix them before getting new insulation installed. (Polyester is naturally moisture resistant).

  7. Pests and vermin – rats and mice like to live in fibreglass insulation, and can cause irreparable damage. Block entry points, use traps, check regularly and repair/replace as required. (Polyester is naturally insect and vermin resistant).

  8. R-value – the thermal performance (R value) of insulation depends on the material, brand, fit, age and quality, alongside factors about the building itself – age, position, materials etc. A professional insulation installer company (such as ourselves) should be able to calculate the R value of what you have currently and what is needed to get it up to the recommended levels.

  9. DIY – if you choose to install the insulation yourself, make sure you follow the instructions included with the product you buy. Insulation will need to be installed to the current NZ Standard (4246:2016) to be compliant with Residential Tenancies Act if it is installed in a rental property. Correctly installing insulation is a tricky business and potentially dangerous or ineffective if you don’t know what you’re doing. Make sure you understand what you’re doing before heading into the ceiling or underfloor.

We hope that helps! Download this infosheet for a simple summary of our top tips.

Check back again soon for more energy efficiency advice. Next time, we’ll give you some tips about how to save money on home insulation costs.

To discuss any of the above in more detail, please call us on 0508 78 78 24, option 1 or click here to book an assessment from one of our home insulation experts.

Also in Ask an expert

Home insulation: 7 tips on how to choose an insulation installer
Home insulation: 7 tips on how to choose an insulation installer

March 07, 2019

With summer behind us, it’s time for the third blog post in our series helping our community be more informed about home insulation – this time, we’re helping you know what to look out for when choosing an insulation provider.

Continue Reading

How much can I save by switching to LED downlights in my home?
How much can I save by switching to LED downlights in my home?

October 10, 2018

Lighting costs the average Kiwi household $220 per year – roughly 12 percent of its electricity bill. As LEDs use up to 85% less energy, installing LED downlights can mean a substantial saving for families around NZ. Find out more here.

Continue Reading

How can you Bee Aware?
How can you Bee Aware?

October 01, 2018

Did you know that one mouthful in three is directly thanks to bee pollination? Bee Aware Month (every September) is a chance for us to learn about the incredible value bees bring to our lives and find out how we can help them!

Continue Reading

Sign up for our newsletter

Get Sustainability Trust's news, events and specials straight to your inbox every month